Installing Williams Talkback on Axis Cameras with 3.5mm Audio Output

From IVS Wiki
Revision as of 15:24, 14 August 2017 by IVSWikiBlue (talk | contribs)
Jump to: navigation, search

Required Parts And Tools

  • Axis P3364, P3365, F41, P1364, P8414, P5914, P5915
  • Williams Talkback System WTX75 WTX75.jpg
  • Williams RX224 Receiver RX224.jpg
  • 3.5mm audio cable 3.5mm audio cable.jpg
 The following equipment is optional in the event of the need to extend the 3.5mm audio cable or extend the power cable
  • 22/2 audio cable Stripped 22 2 Wire.JPG
  • 18/2 low voltage cable
  • B Connectors BCONN.png
  • Fish Tape or Glow Rod 15-4-57-m-mid-flex-glow-rod-set-tools-to-k56415-to-k56415-19671-228x228.jpg
  • Electrical Tape
  • Wire Stripper Wire Stripper and Starbit Driver.JPG

Installation Instructions

  1. Once your camera is installed, locate the AUDIO OUT 3.5mm jack on your camera. In most cases, it is clearly labeled on the camera and/or the GREEN 3.5mm jack on the camera.
Retrieved from "https://ipivs.info/wiki/index.php?title=Installing_Williams_Talkback_on_Axis_Cameras_with_3.5mm_Audio_Output&oldid=1859"