Difference between revisions of "Manually Set Up Privacy Switch Rules for 8.x Firmware"
IVSWikiBlue (talk | contribs) |
IVSWikiBlue (talk | contribs) (→Update I/O Ports) |
||
Line 3: | Line 3: | ||
='''Update I/O Ports'''= | ='''Update I/O Ports'''= | ||
# Click on '''Settings''' in the bottom right hand corner of the window. | # Click on '''Settings''' in the bottom right hand corner of the window. | ||
− | #: [[File: | + | #: [[File:Settings.png]] |
# Click on '''System'''. | # Click on '''System'''. | ||
− | #: [[File: | + | #: [[File:System.png]] |
− | # Click on '''Ports | + | # Click on '''I/O Ports'''. |
− | #: [[File: | + | #: [[File:IO_Ports.png]] |
# For a camera who's ports do not alternate, simply rename the output "Output 2". | # For a camera who's ports do not alternate, simply rename the output "Output 2". | ||
# On a camera with 2 I/O Ports, change I/O Port 2 to '''Output'''. | # On a camera with 2 I/O Ports, change I/O Port 2 to '''Output'''. | ||
# On a camera with 4 I/O Ports, change I/O Port 4 to '''Output'''. | # On a camera with 4 I/O Ports, change I/O Port 4 to '''Output'''. | ||
− | |||
# Click '''Save'''. | # Click '''Save'''. | ||
Revision as of 14:56, 13 November 2020
If you are complete with the previous page, and you did not use a config file for privacy rules, complete the following steps. In the case of multiple cameras, these steps should only be done for the main camera; the recipient cameras do not need rules built.
Contents
Update I/O Ports
- Click on Settings in the bottom right hand corner of the window.
- Click on System.
- Click on I/O Ports.
- For a camera who's ports do not alternate, simply rename the output "Output 2".
- On a camera with 2 I/O Ports, change I/O Port 2 to Output.
- On a camera with 4 I/O Ports, change I/O Port 4 to Output.
- Click Save.
Privacy Rules
LED On
LED Off
Privacy Off Rule
For a Fixed Camera:
Name | Value |
---|---|
action | update |
Image.I0.Overlay.MaskWindows.M0.Enabled | no |
AudioSource.A0.InputGain | 0 |
autofocus | on |
For a PTZ Camera:
Name | Value |
---|---|
action | update |
Image.I0.Overlay.MaskWindows.M0.Enabled | no |
AudioSource.A0.InputGain | 0 |
PTZ.Various.V1.PanEnabled | true |
PTZ.Various.V1.TiltEnabled | true |
PTZ.Various.V1.ZoomEnabled | true |
autofocus | on |
If during the course of audio testing, the cameras have been set to gain other than 0, you must also update the gain value in this rule.
Privacy On Rule
For a Fixed Camera:
Name | Value |
---|---|
action | update |
Image.I0.Overlay.MaskWindows.M0.Enabled | yes |
AudioSource.A0.InputGain | mute |
For a PTZ Camera:
Name | Value |
---|---|
action | update |
Image.I0.Overlay.MaskWindows.M0.Enabled | yes |
AudioSource.A0.InputGain | mute |
PTZ.Various.V1.PanEnabled | false |
PTZ.Various.V1.TiltEnabled | false |
PTZ.Various.V1.ZoomEnabled | false |
Privacy PTZ
Only for a PTZ Camera