Difference between revisions of "Manually Set Up Privacy Switch Rules for 8.x Firmware"

From IVS Wiki
Jump to: navigation, search
(→‎Privacy PTZ)
 
(7 intermediate revisions by the same user not shown)
Line 3: Line 3:
 
='''Update I/O Ports'''=
 
='''Update I/O Ports'''=
 
# Click on '''Settings''' in the bottom right hand corner of the window.
 
# Click on '''Settings''' in the bottom right hand corner of the window.
−
#: [[File:Privacy10.png]]
+
#: [[File:Settings.png]]
 
# Click on '''System'''.
 
# Click on '''System'''.
−
#: [[File:Privacy11.png]]
+
#: [[File:System.png]]
−
# Click on '''Ports & Devices'''.
+
# Click on '''I/O Ports'''.
−
#: [[File:Privacy12.png]]
+
#: [[File:IO_Ports.png]]
 +
# On a camera with 4 I/O Ports, change I/O Port 4 to '''Output'''.
 +
# On a camera with 2 I/O Ports, change I/O Port 2 to '''Output'''.
 
# For a camera who's ports do not alternate, simply rename the output "Output 2".  
 
# For a camera who's ports do not alternate, simply rename the output "Output 2".  
−
# On a camera with 2 I/O Ports, change I/O Port 2 to '''Output'''.
 
−
# On a camera with 4 I/O Ports, change I/O Port 4 to '''Output'''.
 
−
#: [[File:Privacy13.png]]
 
 
# Click '''Save'''.
 
# Click '''Save'''.
  
Line 18: Line 17:
 
==LED On==
 
==LED On==
  
−
[[File:PrivacyLedOn.png]]
+
[[File:07_New_Rule_LED_On.png]]
  
  
 
==LED Off==
 
==LED Off==
  
−
[[File:PrivacyLedOff.png]]
+
[[File:06_New_Rule_LED_Off.png]]
  
 
==Privacy Off Rule==
 
==Privacy Off Rule==
Line 76: Line 75:
  
  
−
[[File:PrivacyOff.png]]
+
[[File:08_Rule_Privacy_Off.png]]
  
 
==Privacy On Rule==
 
==Privacy On Rule==
Line 119: Line 118:
 
|}
 
|}
  
−
[[File:PrivacyOn.png]]
+
[[File:09_Rule_Privacy_On.png]]
  
  
Line 125: Line 124:
 
Only for a PTZ Camera
 
Only for a PTZ Camera
  
−
[[File:PrivacyPTZ.png]]
+
[[File:10_Rule_PTZ_Privacy.png]]
 +
 
 +
Back to [[Privacy_Button_2020-Present#Manual_Set_up_of_Privacy_Rules|Manual Set up of Privacy Rules]]
 +
 
 +
='''Multiple Cameras'''=
 +
# If you are building a room with multiple cameras, you need to add rules onto the master camera, to drive the slave cameras. Make duplicates of the Privacy and/or PTZ rules.
 +
# In the extra sets of rules, select the recipients you created in the recipients field.

Latest revision as of 15:25, 1 December 2020

If you are complete with the previous page, and you did not use a config file for privacy rules, complete the following steps. In the case of multiple cameras, these steps should only be done for the main camera; the recipient cameras do not need rules built.

Update I/O Ports

  1. Click on Settings in the bottom right hand corner of the window.
    Settings.png
  2. Click on System.
    System.png
  3. Click on I/O Ports.
    IO Ports.png
  4. On a camera with 4 I/O Ports, change I/O Port 4 to Output.
  5. On a camera with 2 I/O Ports, change I/O Port 2 to Output.
  6. For a camera who's ports do not alternate, simply rename the output "Output 2".
  7. Click Save.

Privacy Rules

LED On

07 New Rule LED On.png


LED Off

06 New Rule LED Off.png

Privacy Off Rule

For a Fixed Camera:

Name Value
action update
Image.I0.Overlay.MaskWindows.M0.Enabled no
AudioSource.A0.InputGain 0
autofocus on


For a PTZ Camera:

Name Value
action update
Image.I0.Overlay.MaskWindows.M0.Enabled no
AudioSource.A0.InputGain 0
PTZ.Various.V1.PanEnabled true
PTZ.Various.V1.TiltEnabled true
PTZ.Various.V1.ZoomEnabled true
autofocus on

If during the course of audio testing, the cameras have been set to gain other than 0, you must also update the gain value in this rule.


08 Rule Privacy Off.png

Privacy On Rule

For a Fixed Camera:

Name Value
action update
Image.I0.Overlay.MaskWindows.M0.Enabled yes
AudioSource.A0.InputGain mute


For a PTZ Camera:

Name Value
action update
Image.I0.Overlay.MaskWindows.M0.Enabled yes
AudioSource.A0.InputGain mute
PTZ.Various.V1.PanEnabled false
PTZ.Various.V1.TiltEnabled false
PTZ.Various.V1.ZoomEnabled false

09 Rule Privacy On.png


Privacy PTZ

Only for a PTZ Camera

10 Rule PTZ Privacy.png

Back to Manual Set up of Privacy Rules

Multiple Cameras

  1. If you are building a room with multiple cameras, you need to add rules onto the master camera, to drive the slave cameras. Make duplicates of the Privacy and/or PTZ rules.
  2. In the extra sets of rules, select the recipients you created in the recipients field.
Retrieved from "https://ipivs.info/wiki/index.php?title=Manually_Set_Up_Privacy_Switch_Rules_for_8.x_Firmware&oldid=7843"