Difference between revisions of "ROAM Bridge"
IVSWikiBlue (talk | contribs) |
IVSWikiBlue (talk | contribs) |
||
| Line 28: | Line 28: | ||
1. Select <b>Wireless</b> and click on <b>wifi1</b>. | 1. Select <b>Wireless</b> and click on <b>wifi1</b>. | ||
{{img | width = 750px | file = ROAM Bridge Wireless 01.png}} | {{img | width = 750px | file = ROAM Bridge Wireless 01.png}} | ||
| − | + | {{Aside | content = wifi1 will need to be <b>enabled</b> for the following configuration to work.}} | |
<hr> | <hr> | ||
Revision as of 09:14, 27 February 2024
ROAM Bridge
Physical Device
Accessing the ROAM Bridge
To access the ROAM Bridge, it must be powered and connected to the network.
✎You can also access the device by connecting a laptop or computer directly to the deivce.
Once on the network, please navigate to the IP of the bridge, and enter the credentials.
- User:
- admin
- Password:
- admin51
Configure Wireless
1. Select Wireless and click on wifi1.
✎wifi1 will need to be enabled for the following configuration to work.
2. Scroll down to Configuration and select the wireless network you are going to connect to.
3. Continue scrolling to the Security section and enter in the passphrase for the wireless network you selected above.
