Difference between revisions of "ROAM Bridge"
IVSWikiBlue (talk | contribs) |
IVSWikiBlue (talk | contribs) |
||
| Line 29: | Line 29: | ||
{{img | width = 750px | file = ROAM Bridge Wireless 01.png}} | {{img | width = 750px | file = ROAM Bridge Wireless 01.png}} | ||
{{Aside | content = wifi1 will need to be <b>enabled</b> for the following configuration to work.}} | {{Aside | content = wifi1 will need to be <b>enabled</b> for the following configuration to work.}} | ||
| + | {{Aside | hue = 200 | icon = {{book_icon}} | content = To the left of <b>wifi1</b>, you will see a box with [E] or [D]. Make sure this is showing a <b>[D]</b>. This means that is is enabled. The letter D is prompting you to disable wifi1.}} | ||
| + | |||
<hr> | <hr> | ||
| Line 38: | Line 40: | ||
3. Continue scrolling to the <b>Security</b> section and enter in the passphrase for the wireless network you selected above. | 3. Continue scrolling to the <b>Security</b> section and enter in the passphrase for the wireless network you selected above. | ||
{{img | width = 750px | file = ROAM Bridge Wireless 03.png}} | {{img | width = 750px | file = ROAM Bridge Wireless 03.png}} | ||
| + | |||
| + | <hr> | ||
| + | |||
| + | ==Locate DHCP Address of the Bridge== | ||
| + | # Navigate to <b>IP</b>. | ||
| + | #Click on <b>DHCP Client</b>. | ||
| + | From there, you will see the <b>IP Address</b> for wifi1. | ||
}} | }} | ||
Revision as of 09:27, 27 February 2024
Contents
ROAM Bridge
Physical Device
Accessing the ROAM Bridge
To access the ROAM Bridge, it must be powered and connected to the network.
✎You can also access the device by connecting a laptop or computer directly to the deivce.
Once on the network, please navigate to the IP of the bridge, and enter the credentials.
- User:
- admin
- Password:
- admin51
Configure Wireless
1. Select Wireless and click on wifi1.
✎wifi1 will need to be enabled for the following configuration to work.
🕮To the left of wifi1, you will see a box with [E] or [D]. Make sure this is showing a [D]. This means that is is enabled. The letter D is prompting you to disable wifi1.
2. Scroll down to Configuration and select the wireless network you are going to connect to.
3. Continue scrolling to the Security section and enter in the passphrase for the wireless network you selected above.
Locate DHCP Address of the Bridge
- Navigate to IP.
- Click on DHCP Client.
