Difference between revisions of "Start/Stop Button"

From IVS Wiki
Jump to: navigation, search
(Created page with "==IO Configuration== First wire the button to the desired cameras IO phoenix connector. If you are using our buttons we recommend wiring the buttons using CAT6 as shown below:...")
 
(IO Configuration)
Line 2: Line 2:
 
First wire the button to the desired cameras IO phoenix connector. If you are using our buttons we recommend wiring the buttons using CAT6 as shown below:
 
First wire the button to the desired cameras IO phoenix connector. If you are using our buttons we recommend wiring the buttons using CAT6 as shown below:
  
[[File:34.jpg]]
+
[[File:IOButtonDiagram.jpg]]
  
 
Next you will need to go into the admin section under the wired room within our software and define what camera has the button IO hooked up as shown below.
 
Next you will need to go into the admin section under the wired room within our software and define what camera has the button IO hooked up as shown below.

Revision as of 08:33, 23 August 2016

IO Configuration

First wire the button to the desired cameras IO phoenix connector. If you are using our buttons we recommend wiring the buttons using CAT6 as shown below:

IOButtonDiagram.jpg

Next you will need to go into the admin section under the wired room within our software and define what camera has the button IO hooked up as shown below.

35.jpg

Lastly you will need to add the I/O Records right to any user group you want to be able to review recordings crated by the push button as shown below.

36.jpg