Start/Stop Button
Revision as of 07:49, 14 August 2015 by IVSWikiBlue (talk | contribs) (Created page with "==IO Configuration== First wire the button to the desired cameras IO phoenix connector. If you are using our buttons we recommend wiring the buttons using CAT6 as shown below:...")
IO Configuration
First wire the button to the desired cameras IO phoenix connector. If you are using our buttons we recommend wiring the buttons using CAT6 as shown below:
Next you will need to go into the admin section under the wired room within our software and define what camera has the button IO hooked up as shown below.
Lastly you will need to add the I/O Records right to any user group you want to be able to review recordings crated by the push button as shown below.
