Template:Tesira Software
The TesiraForte is a powerful Digital Signal Processor, combining the functionality of a Mixer, Distribution Amplifier, Preamplifier, Noise Canceller, and more. This device is a 1U Rack-mounted device, typically installed in a network closet or a control room, where the analog audio lines or Dante network lines will all connect.
Accessing the Tesira Configuration
In some instances, an IVS Support Engineer may need to connect to the Tesira configuration to make adjustments or troubleshoot a configuration issue. To achieve this, an end user will need to download the Tesira software available on this page: Tesira Software Download
⚠Do not attempt to edit the configuration of your system without the assistance of an IVS Support Engineer! Making changes without understanding the Tesira programming is likely to have adverse effects on your system.
To connect to the system, the end user will need to have network access to the Control port of the Tesira devices. If the Tesira devices are already on the network, then simply open the Tesira Software and select "Connect to System".
If the Tesira devices are not connected to the broader network, the user will need to plug their device into the Ethernet port labelled "Control" on the back of the Tesira devices. Additionally, the user may need to change the network settings of that interface to match the subnet of the Tesira. To determine which subnet the Tesira is currently on, the user can press the button on the front of the device, which will display the current network settings.