Tubular LED Key Switch

From IVS Wiki
Revision as of 13:54, 5 January 2017 by IVSWikiBlue (talk | contribs)
Jump to: navigation, search

Required Parts And Tools

  • Securitron KP-1 Securitron KP1.JPG
  • Wire Stripper Wire Stripper and Starbit Driver.JPG
  • Small Flat head screwdriver Small Flathead Screwdriver.JPG
  • B Connectors BCONN.png
  • Stud Finder
  • 22/4 Solid Gauge Wire Audio Cable.JPG
  • Fish Tape or Glow Rod 15-4-57-m-mid-flex-glow-rod-set-tools-to-k56415-to-k56415-19671-228x228.jpg
  • DryWall Saw DryWall Saw.JPG
  • Mud Ring Mud Ring.JPG

Installation Instructions

  1. Determine where you want your Securitron Tubular Key Switch to be placed. Use your stud finder to determine that there aren't any studs behind the wall.
  2. Using your drywall saw, cut a rectangle in the drywall large enough to fit the mud ring into securely.
  3. Using your glow rod or fish tape, fish your 22/4 cable up and through the wall and ceiling until you reach the location of your camera.
  4. Strip the jacket off of both ends of the cable revealing the 4 individual strands of cable. Strip those individual cables revealing their solid copper inside.
    ArrowsOnp5414.JPG
Retrieved from "https://ipivs.info/wiki/index.php?title=Tubular_LED_Key_Switch&oldid=1120"