Valt Accessories

Privacy Switch

The Privacy switch is used to enable // disable live monitoring in a room regardless of permissions. The privacy switch interfaces directly to the camera(s) within the room. A single privacy switch can control any number of cameras within a room. When privacy mode is enabled within a room it will mask the video and mute the audio for all cameras within the room. If privacy mode is enabled before or while a recording is taking place this will not interrupt the recording and the recording will instead record masked video // muted audio for the duration that the privacy mode was enabled for.

For additional information regarding installing or configuring a privacy switch please click the link: https://ipivs.com/wiki/Privacy_Switch

1. ) Privacy disabled (software)
2. ) Privacy disabled (switch)
3. ) Privacy enabled (software)
4. ) Privacy enabled (switch)

Start/Stop Button

One option to start and or stop a recording is to use a simple momentary contact button, integrated into the button a LED will also be lit to indicate when a recording is active. Buttons are tied to rooms within the software, from an author perspective each button is also assigned an author (when the button is pressed it will use this user to author the recording). IVS sells buttons that have been validated to work with our software with a built in LED (shown below). IVS offers two LED options for recording indication Red (shown below) and Blue.

1. ) Shows the button when a recording is not active for the associated room.
2. ) Shows the button when a recording is active for the associated room.

Recording LED

A recording LED can be mounted inside or outside a room to indicate when a recording is taking place.

1. ) Shows the LED when a recording is not active
2. ) Shows the LED when a recording is active

Recording Sign

A recording LED sign can be mounted inside or outside a room to indicate when a recording is active.

1. ) Shows the sign when a recording is not in progress
2. ) Shows the sign when a recording is in progress

Access Control

Access control readers can be configured to start and/or stop a recording with the Valt software. Readers are tied to rooms, and card numbers are tied to specific users. The advantage of using an access card and reader is the software can understand who started the recording and apply the correct author to the recording automatically.

1. ) Example of card reader used to start and stop a recording.
2. ) Axis A1001 required to interface access reader with Valt software.