Notes about AVB
AVB Extreme Switch
If the install includes one Forte server, and ONLY one remote expander OR a TCM-1A microphone, (and any number of analog mics and speakers) there is no need for an AVB Extreme switch. If that’s the case, the expander/beamtracking mic will be plugged into the AVB port on the Forte. Any config with more than a 1:1 ratio of remote devices to Forte servers will require the use of the Extreme switch. It also means AVB must be enabled on the Forte in the device settings.
Extreme Switch License
Extreme switches require a license, and needs to have AVB enabled. If this isn't done before being shipped, call IVS Support to complete. Either a laptop with a serial port or a serial-to-usb adapter will be required. Plug into the Console port on the Extreme switch to perform this task.
On-site Configuration
Before arriving on site, determine whether the client wants to access their Forte from their network (this will almost always be the case), or if it will be a standalone solution. This will change the physical cabling, as well as how to set up the network settings.
Physical Installation:
- If using an Extreme switch, and they want the Forte on their network: The Forte must be able to talk to any expanders or TCM-1A mics, so the Forte server and the Extreme switch need to be plugged into their network. All the remote devices still plug into the Extreme switch, as will the AVB port from the Forte.
- If it’s a standalone solution with an Extreme switch: Plug both Forte ports into the Extreme switch, all expanders and beamtracking mics, and a laptop for configuration.
