View source for Installing an Axis P5414/P5415 with a Tesira Forte DSP

{{Wirediagram P5414 Tesira Forte}}

==Required Parts And Tools==

* Axis P5415 or P5415              
* T20 Torx security bit
* T10 Torx Security bit
* Wire Stripper   
* Tap-Cons (if mounting to concrete) (7/8") 
* Screws and Anchors (7/8") 
* 1/2" paddle bit
* Toggle Bolts (If mounting mic to drop ceiling tile) (3/16")  
* Drill bit and drill 
* Phillips head drill bit or Phillips head screwdriver
* Small Flat head screwdriver (#3) 
* Hole Saw (2")  
* B Connectors 
* Stud Finder
* Cat5/6 Patch Cable (7ft-15ft recommended)   
* Shielded Stranded 22/2 +ground Wire 
* Fish Tape or Glow Rods 
* Biamp Tesira Forte unit
* Biamp ceiling microphone

{{P5414 Installation Instructions}}

{{Connecting Tesira}}