View source for Manually Set Up Privacy Switch Rules for 9.x Firmware

If you are complete with the previous page, and you did not use a config file for privacy rules, complete the following steps. In the case of multiple cameras, these steps should only be done for the main camera; the recipient cameras do not need rules built. 

='''Update I/O Ports'''=
# Click on '''Settings''' in the bottom right hand corner of the window.
#: [[File:Settings.png]]
# Click on '''System'''.
#: [[File:System.png]]
# Click on '''I/O Ports'''.
#: [[File:IO_Ports_9_FW.png]]
# On a camera with 4 I/O Ports, change I/O Port 4 to '''Output'''. 
# On a camera with 2 I/O Ports, change I/O Port 2 to '''Output'''. 
# For a camera who's ports do not alternate, simply rename the output "Output 2". 
# Click '''Save'''.

='''Privacy Rules'''=

==LED Toggle==

[[File:01_Rule_LED_V2.png]]

For a camera with 2 IO Ports, select Output 2. 

For a camera with 4 IO Ports, select Output 4.

==Privacy Off Rule==

[[File:02_Rule_Privacy_Off.png]]

In the Query String Suffix field, for a fixed camera, type: 
<pre>action=update&Image.I0.Overlay.MaskWindows.M0.Enabled=no&AudioSource.A0.InputGain=0</pre>

In the Query String Suffix field, for a PTZ camera, type: 
<pre>action=update&Image.I0.Overlay.MaskWindows.M0.Enabled=no&AudioSource.A0.InputGain=4&PTZ.Various.V1.PanEnabled=true&PTZ.Various.V1.TiltEnabled=true&PTZ.Various.V1.ZoomEnabled=true&autofocus=on</pre>

==Privacy On Rule==


[[File:03_Rule_Privacy_On.png]]

In the Query String Suffix field, for a fixed camera, type: 
<pre>action=update&Image.I0.Overlay.MaskWindows.M0.Enabled=yes&AudioSource.A0.InputGain=mute</pre>

In the Query String Suffix field, for a PTZ camera, type: 
<pre>action=update&Image.I0.Overlay.MaskWindows.M0.Enabled=yes&AudioSource.A0.InputGain=mute&PTZ.Various.V1.PanEnabled=false&PTZ.Various.V1.TiltEnabled=false&PTZ.Various.V1.ZoomEnabled=false</pre>

==Privacy PTZ==
Only for a PTZ Camera. The directions are as such: 

9.	Privacy PTZ On

a.	Condition
i.	Digital Input
ii.	Click use this condition as trigger

b.	Port
i.	Input 3

c.	Action
i.	Go to preset position
ii.	Select “new” privacy preset that was set in camera interface, made by you onsite
iii.	Click home timeout

10.	Privacy PTZ Off

a.	Condition
i.	Digital Input
ii.	Click invert this condition
iii.	Click use this condition as trigger

b.	Port
i.	Input 3

c.	Action
i.	Go to preset position
ii.	Select “new” home preset that was set in camera interface, made by you onsite
iii.	Click home timeout

Back to [[Privacy_Button_2020-Present#Manual_Set_up_of_Privacy_Rules|Manual Set up of Privacy Rules]]

='''Multiple Cameras'''=
# If you are building a room with multiple cameras, you need to add rules onto the master camera, to drive the slave cameras. Make duplicates of the Privacy and/or PTZ rules. 
# In the extra sets of rules, select the recipients you created in the recipients field.