Difference between revisions of "Template:F41 MX202i STM1"
IVSWikiBlue (talk | contribs) (→Connecting the STM-1) |
IVSWikiBlue (talk | contribs) (→Connecting and Mounting the Microphone) |
||
| Line 15: | Line 15: | ||
#Measure center of the drop ceiling tile and drill a similar hole with the ½” paddle bit. | #Measure center of the drop ceiling tile and drill a similar hole with the ½” paddle bit. | ||
#Align the single gang plate to the location of the microphone on the drop ceiling tile using a pair of toggle bolts. | #Align the single gang plate to the location of the microphone on the drop ceiling tile using a pair of toggle bolts. | ||
| − | #: | + | #: {{img | file = Plate_Mounted_to_Ceiling.JPG | width=250px}} |
#Run the MX202i through the ½” hole in the ceiling tile and single gang plate with the rubber stopper to secure the microphone in place and plugging the ½” hole . | #Run the MX202i through the ½” hole in the ceiling tile and single gang plate with the rubber stopper to secure the microphone in place and plugging the ½” hole . | ||
#Adjust the length of the cable of the microphone to a desirable length, hiding the remainder in the ceiling near the STM-1. Attach the windscreen to the MX202i. | #Adjust the length of the cable of the microphone to a desirable length, hiding the remainder in the ceiling near the STM-1. Attach the windscreen to the MX202i. | ||
| − | #: | + | #: {{img | file = Mx202i.jpg | width=250px}} |
# Run the XLR mini cable to the STM-1 location. | # Run the XLR mini cable to the STM-1 location. | ||
#Connect the connect the XLR mini to the 4 pin Male XLR adapter. | #Connect the connect the XLR mini to the 4 pin Male XLR adapter. | ||
| Line 27: | Line 27: | ||
:*The audio line will be connected to a 3.5mm audio cable (cut approx. 12") with B-connectors and inserted in the "Audio In" port | :*The audio line will be connected to a 3.5mm audio cable (cut approx. 12") with B-connectors and inserted in the "Audio In" port | ||
:*Power will be connected to the I/O connector (Black to 1, Red to 2) | :*Power will be connected to the I/O connector (Black to 1, Red to 2) | ||
| − | : | + | : {{img | file = F41CompleteWiring.jpg | width=400px}} |
Latest revision as of 12:58, 10 May 2022
Connecting the STM-1
- Cut a short piece of 22/2 cable (approx. 1 inch). Strip the jacket and from the cable and remove all contents keeping only the red cable. On both ends of the red cable, strip off a piece of the jacket (See picture).
-
- Connect one end of the 1 inch audio cable to the +PWR terminal and connect the other end into the +PHNTM terminal.
-
- Connect the cable ran for power to both PWR terminals (Red to +, Black to the other terminal) of the STM-1. Connect the other side to the IO phoenix connector (Red to 2, Black to 1).
- Connect the cable ran for audio to both LO-Z OUTPUT terminals (Red to +, Black to -, and ground to the ground terminal) of the STM-1. Connect the other end of the 3.5mm cable to the in on the F41. (cut to appropriate length between STM-1 and F41)
-
Connecting and Mounting the Microphone
- Asses the drop ceiling to decide best mounting placement for the MX202i. Avoid tiles adjacent to HVAC or fire safety devices.
- Drill a hole into the center of the single gang plate using the ½” paddle bit (if not prefabricated).
- Measure center of the drop ceiling tile and drill a similar hole with the ½” paddle bit.
- Align the single gang plate to the location of the microphone on the drop ceiling tile using a pair of toggle bolts.
-
- Run the MX202i through the ½” hole in the ceiling tile and single gang plate with the rubber stopper to secure the microphone in place and plugging the ½” hole .
- Adjust the length of the cable of the microphone to a desirable length, hiding the remainder in the ceiling near the STM-1. Attach the windscreen to the MX202i.
-
- Run the XLR mini cable to the STM-1 location.
- Connect the connect the XLR mini to the 4 pin Male XLR adapter.
- Strip away a portion of the red and black cables inside the pigtail, revealing the copper wire inside.
- The microphone will be connected via the input terminals of the STM-1 (Red to +, Black to -, ground to the ground terminal).
- Connect the female XLR to the Male XLR adapter
- Connect the other ends of the 22/2 cable to the terminals on F41.
- The audio line will be connected to a 3.5mm audio cable (cut approx. 12") with B-connectors and inserted in the "Audio In" port
- Power will be connected to the I/O connector (Black to 1, Red to 2)
-
