Notes about AVB

AVB Extreme Switch

If we are installing one Forte server, and ONLY one remote expander OR a TCM-1A microphone, (and any number of analog mics and speakers) there is no need for an AVB Extreme switch. If that’s the case, the expander/beamtracking mic will be plugged into the AVB port on the Forte. Any config with more than a 1:1 ratio of remote devices to Forte servers will require the use of the Extreme switch. It also means we must enable AVB on the Forte in the device settings.

Extreme Switch License

The Extreme switch needs a license, and needs to have AVB enabled. If this isn't done before being shipped, we will need to get IVS Support to complete. Either a laptop with a serial port or a serial-to-usb adapter will be required. Plug into the Console port on the Extreme switch to perform this task.

On-site Configuration

Physical Installation:

1. If we are using an Extreme switch, and they want the Forte on their network: The Forte must be able to talk to any expanders or TCM-1A mics, so the Forte server and the Extreme switch need to be plugged into their network. All the remote devices still plug into the Extreme switch, as will the AVB port from the Forte.
2. If it’s a standalone solution with an Extreme switch: Plug both Forte ports into the Extreme switch, all expanders and beamtracking mics, and our laptop for configuration.