VALT 6 Observe

The observe section is used to view live video and audio, prepare or start recordings and stop, pause or manage active recordings.

[[File:|link=|960px]]

1. Clicking the search button will open up a search dialog box that allows a user to search for a cameras or rooms.
2. Select or change a matrix view using the buttons shown above.
3. Selecting a room or camera from this section will pull up the corresponding audio and video.

⤺ Back to the Main Manual Page

[[File:|link=|960px]]

1. Selecting a “Room” will pull up the corresponding audio / video as shown above.
2. Prepare: Thhis button is used to fill out information about the recording ahead of time so the recording can be initiated with a single click.
3. Record: This button is used to initiate a recording in the shown “Room”. Pressing this will bring up a information template.
4. Lock: This button is used to prevent recording / viewing a room until the room is unlocked by an authorized user.

⤺ Back to the Main Manual Page

Device Toolbar

[[File:|link=|960px]]

1. Clicking on a camera image will bring up the device toolbar.
2. This shows the device name.
3. If the device is a PTZ camera and the user has PTZ control rights the preset menu will be shown. This allows a user to add / delete / and use presets to control the camera.
4. The digital zoom shows how zoomed into the image the user is, hovering over the button will pull up a slider that can be used to zoom in / out.
5. PTZ control button enables optical Pan Tilt and Zoom control.
6. Audio control button can be used to enable or mute the audio.

⤺ Back to the Main Manual Page

PTZ Control

PTZ control is used to control the pan tilt and zoom of a camera through the VALT software.

[[File:|link=|960px]]

1. Clicking anywhere on the camera image will pull up the camera menu (2).
2. Camera Menu
3. Clicking on the PTZ icon will change the icon from black to red (signalling that PTZ is enabled) the mouse will change to a target as shown above (5).
4. The scroll wheel can be used to zoom in / out optically when the PTZ icon is enabled or digitally when it is not.
5. PTZ Target: left clicking will recenter the camera on whatever the target is pointing at./li>

⤺ Back to the Main Manual Page