Manually Set Up Privacy Switch Rules for 9.x Firmware

From IVS Wiki
Revision as of 14:05, 13 November 2020 by IVSWikiBlue (talk | contribs) (→‎Update I/O Ports)
Jump to: navigation, search

If you are complete with the previous page, and you did not use a config file for privacy rules, complete the following steps. In the case of multiple cameras, these steps should only be done for the main camera; the recipient cameras do not need rules built.

Update I/O Ports

  1. Click on Settings in the bottom right hand corner of the window.
    Settings.png
  2. Click on System.
    System.png
  3. Click on I/O Ports.
    IO Ports 9 FW.png
  4. For a camera who's ports do not alternate, simply rename the output "Output 2".
  5. On a camera with 2 I/O Ports, change I/O Port 2 to Output.
  6. On a camera with 4 I/O Ports, change I/O Port 4 to Output.
  7. Click Save.

Privacy Rules

LED On

PrivacyLedOn.png


LED Off

PrivacyLedOff.png

Privacy Off Rule

For a Fixed Camera:

Name Value
action update
Image.I0.Overlay.MaskWindows.M0.Enabled no
AudioSource.A0.InputGain 0
autofocus on


For a PTZ Camera:

Name Value
action update
Image.I0.Overlay.MaskWindows.M0.Enabled no
AudioSource.A0.InputGain 0
PTZ.Various.V1.PanEnabled true
PTZ.Various.V1.TiltEnabled true
PTZ.Various.V1.ZoomEnabled true
autofocus on

If during the course of audio testing, the cameras have been set to gain other than 0, you must also update the gain value in this rule.


PrivacyOff.png

Privacy On Rule

For a Fixed Camera:

Name Value
action update
Image.I0.Overlay.MaskWindows.M0.Enabled yes
AudioSource.A0.InputGain mute


For a PTZ Camera:

Name Value
action update
Image.I0.Overlay.MaskWindows.M0.Enabled yes
AudioSource.A0.InputGain mute
PTZ.Various.V1.PanEnabled false
PTZ.Various.V1.TiltEnabled false
PTZ.Various.V1.ZoomEnabled false

PrivacyOn.png


Privacy PTZ

Only for a PTZ Camera

PrivacyPTZ.png

Retrieved from "https://ipivs.info/wiki/index.php?title=Manually_Set_Up_Privacy_Switch_Rules_for_9.x_Firmware&oldid=7636"