Manually Set Up Privacy Switch Rules for 9.x Firmware

From IVS Wiki
Revision as of 14:43, 13 November 2020 by IVSWikiBlue (talk | contribs) (→‎Privacy Off Rule)
Jump to: navigation, search

If you are complete with the previous page, and you did not use a config file for privacy rules, complete the following steps. In the case of multiple cameras, these steps should only be done for the main camera; the recipient cameras do not need rules built.

Update I/O Ports

  1. Click on Settings in the bottom right hand corner of the window.
    Settings.png
  2. Click on System.
    System.png
  3. Click on I/O Ports.
    IO Ports 9 FW.png
  4. On a camera with 4 I/O Ports, change I/O Port 4 to Output.
  5. On a camera with 2 I/O Ports, change I/O Port 2 to Output.
  6. For a camera who's ports do not alternate, simply rename the output "Output 2".
  7. Click Save.

Privacy Rules

LED Toggle

01 Rule LED Old.png


Privacy Off Rule

02 Rule Privacy Off.png

In the Query String Suffix field, type: 

http://127.0.0.1/axis-cgi/param.cgi

Privacy On Rule

For a Fixed Camera:

Name Value
action update
Image.I0.Overlay.MaskWindows.M0.Enabled yes
AudioSource.A0.InputGain mute


For a PTZ Camera:

Name Value
action update
Image.I0.Overlay.MaskWindows.M0.Enabled yes
AudioSource.A0.InputGain mute
PTZ.Various.V1.PanEnabled false
PTZ.Various.V1.TiltEnabled false
PTZ.Various.V1.ZoomEnabled false

03 Rule Privacy On.png

In the XXX field, type: 

http://127.0.0.1/axis-cgi/param.cgi

Privacy PTZ

Only for a PTZ Camera

Retrieved from "https://ipivs.info/wiki/index.php?title=Manually_Set_Up_Privacy_Switch_Rules_for_9.x_Firmware&oldid=7648"