Manually Set Up Privacy Switch Rules for 9.x Firmware
If you are complete with the previous page, and you did not use a config file for privacy rules, complete the following steps. In the case of multiple cameras, these steps should only be done for the main camera; the recipient cameras do not need rules built.
Contents
Update I/O Ports
- Click on Settings in the bottom right hand corner of the window.
- Click on System.
- Click on I/O Ports.
- On a camera with 4 I/O Ports, change I/O Port 4 to Output.
- On a camera with 2 I/O Ports, change I/O Port 2 to Output.
- For a camera who's ports do not alternate, simply rename the output "Output 2".
- Click Save.
Privacy Rules
LED Toggle
Privacy Off Rule
In the Query String Suffix field, type:
http://127.0.0.1/axis-cgi/param.cgi
Privacy On Rule
In the Query String Suffix field, type:
http://127.0.0.1/axis-cgi/param.cgi
Privacy PTZ
Only for a PTZ Camera