Manually Set Up Privacy Switch Rules for 9.x Firmware

From IVS Wiki
Revision as of 14:44, 13 November 2020 by IVSWikiBlue (talk | contribs) (→‎Privacy On Rule)
Jump to: navigation, search

If you are complete with the previous page, and you did not use a config file for privacy rules, complete the following steps. In the case of multiple cameras, these steps should only be done for the main camera; the recipient cameras do not need rules built.

Update I/O Ports

  1. Click on Settings in the bottom right hand corner of the window.
    Settings.png
  2. Click on System.
    System.png
  3. Click on I/O Ports.
    IO Ports 9 FW.png
  4. On a camera with 4 I/O Ports, change I/O Port 4 to Output.
  5. On a camera with 2 I/O Ports, change I/O Port 2 to Output.
  6. For a camera who's ports do not alternate, simply rename the output "Output 2".
  7. Click Save.

Privacy Rules

LED Toggle

01 Rule LED Old.png


Privacy Off Rule

02 Rule Privacy Off.png

In the Query String Suffix field, for a fixed camera, type: 

http://127.0.0.1/axis-cgi/param.cgi

In the Query String Suffix field, for a fixed camera, type: 

http://127.0.0.1/axis-cgi/param.cgi

Privacy On Rule

03 Rule Privacy On.png

In the Query String Suffix field, for a fixed camera, type: 

http://127.0.0.1/axis-cgi/param.cgi

In the Query String Suffix field, for a PTZ camera, type: 

http://127.0.0.1/axis-cgi/param.cgi

Privacy PTZ

Only for a PTZ Camera

Retrieved from "https://ipivs.info/wiki/index.php?title=Manually_Set_Up_Privacy_Switch_Rules_for_9.x_Firmware&oldid=7651"