Manually Set Up Privacy Switch Rules for 9.x Firmware

From IVS Wiki
Revision as of 14:57, 13 November 2020 by IVSWikiBlue (talk | contribs) (→‎Privacy PTZ)
Jump to: navigation, search

If you are complete with the previous page, and you did not use a config file for privacy rules, complete the following steps. In the case of multiple cameras, these steps should only be done for the main camera; the recipient cameras do not need rules built.

Update I/O Ports

  1. Click on Settings in the bottom right hand corner of the window.
    Settings.png
  2. Click on System.
    System.png
  3. Click on I/O Ports.
    IO Ports 9 FW.png
  4. On a camera with 4 I/O Ports, change I/O Port 4 to Output.
  5. On a camera with 2 I/O Ports, change I/O Port 2 to Output.
  6. For a camera who's ports do not alternate, simply rename the output "Output 2".
  7. Click Save.

Privacy Rules

LED Toggle

01 Rule LED Old.png

For a camera with 2 IO Ports, select Output 2.

For a camera with 4 IO Ports, select Output 4.

Privacy Off Rule

02 Rule Privacy Off.png

In the Query String Suffix field, for a fixed camera, type: 

action=update&Image.I0.Overlay.MaskWindows.M0.Enabled=no&AudioSource.A0.InputGain=0

In the Query String Suffix field, for a PTZ camera, type: 

action=update&Image.I0.Overlay.MaskWindows.M0.Enabled=no&AudioSource.A0.InputGain=4&PTZ.Various.V1.PanEnabled=true&PTZ.Various.V1.TiltEnabled=true&PTZ.Various.V1.ZoomEnabled=true&autofocus=on

Privacy On Rule

03 Rule Privacy On.png

In the Query String Suffix field, for a fixed camera, type: 

action=update&Image.I0.Overlay.MaskWindows.M0.Enabled=yes&AudioSource.A0.InputGain=mute

In the Query String Suffix field, for a PTZ camera, type: 

action=update&Image.I0.Overlay.MaskWindows.M0.Enabled=yes&AudioSource.A0.InputGain=mute&PTZ.Various.V1.PanEnabled=false&PTZ.Various.V1.TiltEnabled=false&PTZ.Various.V1.ZoomEnabled=false

Privacy PTZ

Only for a PTZ Camera. The directions are as such:

9. Privacy PTZ On a. Condition i. Digital Input ii. Click use this condition as trigger b. Port i. Input 3 c. Action i. Go to preset position ii. Select “new” privacy preset that was set in camera interface, made by you onsite iii. Click home timeout 10. Privacy PTZ Off a. Condition i. Digital Input ii. Click invert this condition iii. Click use this condition as trigger b. Port i. Input 3 c. Action i. Go to preset position ii. Select “new” home preset that was set in camera interface, made by you onsite iii. Click home timeout

Retrieved from "https://ipivs.info/wiki/index.php?title=Manually_Set_Up_Privacy_Switch_Rules_for_9.x_Firmware&oldid=7656"