VALT 6 Observe

The observe section is used to view live video and audio, prepare or start recordings and stop, pause or manage active recordings.

[[File:|link=|960px]]

1. Clicking the search button will open up a search dialog box that allows a user to search for a cameras or rooms.
2. Select or change a matrix view using the buttons shown above.
3. Selecting a room or camera from this section will pull up the corresponding audio and video.

⤺ Back to the Main Manual Page

[[File:|link=|960px]]

1. Selecting a “Room” will pull up the corresponding audio / video as shown above.
2. Prepare: Thhis button is used to fill out information about the recording ahead of time so the recording can be initiated with a single click.
3. Record: This button is used to initiate a recording in the shown “Room”. Pressing this will bring up a information template.
4. Lock: This button is used to prevent recording / viewing a room until the room is unlocked by an authorized user.

⤺ Back to the Main Manual Page

Device Toolbar

[[File:|link=|960px]]

1. Clicking on a camera image will bring up the device toolbar.
2. This shows the device name.
3. If the device is a PTZ camera and the user has PTZ control rights the preset menu will be shown.
   This allows a user to add / delete / and use presets to control the camera.
4. The digital zoom shows how zoomed into the image the user is, hovering over the button will pull up a slider that can be used to zoom in / out.
5. PTZ control button enables optical Pan Tilt and Zoom control.
6. Audio control button can be used to enable or mute the audio.

⤺ Back to the Main Manual Page