View source for Manually Set Up Privacy Switch Rules for 6.x Firmware

If you are complete with the previous page, and you did not use a config file for privacy rules, complete the following steps. In the case of multiple cameras, these steps should only be done for the main camera; the recipient cameras do not need rules built. 

='''Update I/O Ports'''=
# Click on '''Setup''' in the upper right hand corner of the window.
#: [[File:Privacy10.png]]
# Click on '''System Options'''.
#: [[File:Privacy12.png]]
# Click on '''Ports & Devices'''.
#: [[File:Privacy13.png]]
# For a camera who's ports do not alternate, simply rename the output "Output 2". 
# On a camera with 2 I/O Ports, change I/O Port 2 to '''Output'''. 
# On a camera with 4 I/O Ports, change I/O Port 4 to '''Output'''. 
# Click '''Save'''.

='''Privacy Rules'''=

==LED On==

[[File:01_New_LED_On.png]]


==LED Off==

[[File:01_New_LED_Off.png]]

==Privacy Off Rule==

For a Fixed Camera: 
{| class="wikitable" style="text-align: center;"
!|Name
!|Value
|-
|action
|update
|-
|Image.I0.Overlay.MaskWindows.M0.Enabled
|no
|-
|AudioSource.A0.InputGain
|0
|-
|autofocus
|on
|}


For a PTZ Camera: 
{| class="wikitable" style="text-align: center;"
!|Name
!|Value
|-
|action
|update
|-
|Image.I0.Overlay.MaskWindows.M0.Enabled
|no
|-
|AudioSource.A0.InputGain
|0
|-
|PTZ.Various.V1.PanEnabled
|true
|-
|PTZ.Various.V1.TiltEnabled
|true
|-
|PTZ.Various.V1.ZoomEnabled
|true
|-
|autofocus
|on
|}
If during the course of audio testing, the cameras have been set to gain other than 0, you must also update the gain value in this rule. 



[[File:PrivacyOff.png]]

==Privacy On Rule==
For a Fixed Camera: 
{| class="wikitable" style="text-align: center;"
!|Name
!|Value
|-
|action
|update
|-
|Image.I0.Overlay.MaskWindows.M0.Enabled
|yes
|-
|AudioSource.A0.InputGain
|mute
|}


For a PTZ Camera: 
{| class="wikitable" style="text-align: center;"
!|Name
!|Value
|-
|action
|update
|-
|Image.I0.Overlay.MaskWindows.M0.Enabled
|yes
|-
|AudioSource.A0.InputGain
|mute
|-
|PTZ.Various.V1.PanEnabled
|false
|-
|PTZ.Various.V1.TiltEnabled
|false
|-
|PTZ.Various.V1.ZoomEnabled
|false
|}

[[File:PrivacyOn.png]]


==Privacy PTZ==
Only for a PTZ Camera

[[File:PrivacyPTZ.png]]


Back to [[Privacy_Button_2020-Present#Manual_Set_up_of_Privacy_Rules|Manual Set up of Privacy Rules]]

='''Multiple Cameras'''=
# If you are building a room with multiple cameras, you need to add rules onto the master camera, to drive the slave cameras. Make duplicates of the Privacy and/or PTZ rules. 
# In the extra sets of rules, select the recipients you created in the recipients field.