View source for Installing an Axis P5414/P5415 with a Shure MX202i Microphone

{{Wirediagram P5414 MX202}}

==Required Parts And Tools==

* Axis P5415 or P5415 
* RDL STM-1 
* Female XLR Pigtail 
* Shure MX202i Microphone             
* T20 Torx security bit
* T10 Torx security bit 
* Wire Stripper  
* Tap-Cons (if mounting to concrete) (7/8") 
* Screws and Anchors (7/8")  
* 1/2" paddle bit
* 1 blank single gang wall plate 
* Toggle Bolts (for mic mount) (3/16")
* Drill bit and drill 
* Phillips head drill bit or Phillips head screwdriver
* Small Flat head screwdriver (#3)
* Hole Saw (2")  
* B Connectors 
* Stud Finder
* Cat5/6 Patch Cable (7ft-15ft recommended) 
* Shielded Stranded 22/2 + ground Wire 
* Fish Tape or Glow Rods 
* Wind Screen (Inside MX202i kit) 
* Rubber Stopper (Inside MX202i kit) 
* 4 pin XLR-M to XLR-M Adapter (Inside MX202i kit)

{{P5414 Installation Instructions}}

{{Connecting The Microphone Shure MX202i STM1}}